Cara setting IPv6 dengan Satu Router di Cisco Packet Tracer

• Cara melihat IPv6 di PC 0

Masuk ke command prompt

PC>ipconfig /all

FastEthernet0 Connection:(default port)
Physical Address…………….: 0001.63B8.343C
Link-local IPv6 Address………: FE80::201:63FF:FEB8:343C
IP Address………………….: 0.0.0.0
Subnet Mask…………………: 0.0.0.0
Default Gateway……………..: 0.0.0.0
DNS Servers…………………: 0.0.0.0
DHCP Servers………………..: 0.0.0.0

• Cara ping dari PC 1 ke PC 0

PC>ping FE80::201:63FF:FEB8:343C

Pinging FE80::201:63FF:FEB8:343C with 32 bytes of data:

Reply from FE80::201:63FF:FEB8:343C: bytes=32 time=255ms TTL=128
Reply from FE80::201:63FF:FEB8:343C: bytes=32 time=3ms TTL=128
Reply from FE80::201:63FF:FEB8:343C: bytes=32 time=0ms TTL=128
Reply from FE80::201:63FF:FEB8:343C: bytes=32 time=0ms TTL=128

Ping statistics for FE80::201:63FF:FEB8:343C:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 255ms, Average = 64ms

• Setting di CLI Router0

Router>
Router>
Router>en
Router#conf t
Router(config)#ipv6 unicast-routing
Router(config)#

Router(config)#int g0/0
Router(config-if)#IPv6 Address FE80::1 link-local
Router(config-if)#no shut

Router(config-if)#
Router(config-if)#int g0/1
Router(config-if)#IPv6 Address FE80::1 link-local
Router(config-if)#no shut

Router(config-if)#int g0/0
Router(config-if)#ipv6 addr 2001:DBB:AAAA:B::1/64
Router(config-if)#

Router(config-if)#int g0/1
Router(config-if)#ipv6 addr 2001:DBB:AAAA:A::1/64
Router(config-if)#